立井过砂岩富含水层工作面预注浆分析

郑煤集团杨河煤业43采区樊寨副立井施工中需要穿过预计涌水量187 m³/h、厚57 m的砂岩含水层。针对第1回次采用普通水泥工作面预注浆、吸浆量少、升压快、效果差、达不到预期目的等不利情况，在后3回次采用大压力，白银水泥、超细水泥等新材料、单孔上下端正反同时注浆新工艺，采用压注清水、水玻璃，利用水玻璃的黏性，反复冲洗钻孔把细小裂隙中锈蚀颗粒带出，打开注浆通道，同时针对竖向裂隙多、横向裂隙不联系，加密钻孔布置，缩小注浆段高，取得了较好的注浆效果。     

Relationship between the inductive response observed during electrochemical impedance measurements on aluminium and local corrosion processes

In situ real-time imaging and electrochemical impedance spectroscopy (EIS) measurements were performed on pure aluminium, aluminium-copper and copper electrodes, with the aim to elucidate the relationship between the shape of EIS spectra and the local processes occurring on the surface of corroding aluminium, with particular attention to the appearance of inductive behaviour. When a stable oxide was present on the aluminium surface, the impedance modulus increased with decreasing frequencies, indicating the absence of inductive behaviour. Conversely, the presence of depassivating condition coupled with the availability of some anodic current, generated localized corrosion and associated hydrogen evolution at the corrosion front (also known as superfluous hydrogen evolution). In these conditions, a clear inductive behaviour was observed, regardless on the source of the anodic current at the corrosion front, i.e. galvanic coupling or external anodic polarization.     

载荷影响下的机电阻抗协整结构损伤识别方法

高频机电阻抗(electromechanical impedance, 简称EMI)方法利用粘贴在结构表面的压电传感器(piezoelectric transducer, 简称PZT)进行主动激励，通过连续监测和分析PZT机电导纳信号的变化评估结构的健康状态；然而EMI方法容易受到环境工况变化的影响，导致结构损伤的误报。针对此问题，采用时间序列协整方法处理及消除结构工作载荷对阻抗谱特征信号的影响。该方法是基于结构动荷载作用下PZT阻抗谱导纳信号的非平稳特征，将动荷载影响下的阻抗谱非平稳时间序列经线性组合变换成平稳时间序列，根据得到的协整余量序列有效判断结构的健康状态。为验证该方法的有效性，开展了动应力影响下铝梁结构的螺栓松动损伤识别实验。结果表明，协整消除了动态应力对EMI方法的影响，当铝梁内存在持续变化的应力时，仍可以准确识别螺栓松动。机电阻抗协整方法能够消除结构健康监测中荷载作用的影响，及时准确地进行结构损伤识别。     

露天爆破智能设计系统开发及应用

为了提高露天台阶爆破设计的规范化、便捷性，对露天台阶爆破设计系统进行了开发研究。以Visual C++为开发平台，软件采用MFC框架，结合OpenGL三维引擎开发技术，实现软件从底层自主开发生态的建立。通过现场工程实践应用表明爆破设计人员可以轻松通过本系统实现三维环境下的布孔设计和爆破网络设计以及精确的GPS布孔，并取得了良好的爆破效果，提高了台阶爆破的设计质量和设计速度。爆破智能设计系统能够实现矿山爆破设计的数字化、科学化、自动化和高效化，对于露天爆破具有十分重要的意义。     

石墨烯改性涂层防护性能研究

为减少团聚，提高石墨烯在涂层中的分散性，研究采用纳米分散技术预先制备了石墨烯分散液，再将其分散至环氧树脂中获得石墨烯改性复合涂层。通过对石墨烯含量为 0、0.3%、0.6%的复合涂层进行盐水浸泡、盐雾、阴极剥离实验及电化学性能测试，证明石墨烯的加入显著增强了涂层的防护性能。石墨烯复合涂层在 3.5%盐水中浸泡 1 008 h后，涂层低频阻抗仍大于 106 Ω·cm²比未添加石墨烯的涂层提高了 3个数量级，且盐雾实验 6 000 h后涂层表面仍保持完好；含 0.6%石墨烯，的涂层耐蚀行为劣于石墨烯含量为 0.3%的涂层。     

基于DEM的振动筛筛孔形状对潮湿原煤筛分效果影响的研究

随着原煤含水量的增加,引起原煤颗粒间相互粘聚,影响振动筛筛分效率。基于离散元法,运用EDEM软件模拟了潮湿原煤颗粒在圆形筛孔、方形筛孔和矩形筛孔的筛分过程,并且以筛分效率和阻碍粒排出率为衡量指标,对振动筛筛孔形状影响潮湿煤筛分效果进行了研究。结果表明:在筛孔名义尺寸相同的情况下,潮湿煤在矩形筛孔筛面上的筛分效果最好,方形筛孔次之,圆形筛孔最差。     

Corrosion behaviour and mechanism of 6082 aluminium alloy in NaCl and Na2SO4 etchants

The corrosion behaviour of 6082 aluminium alloy was studied by measuring the electrochemical impedance spectra and electrode polarization curves. After the electrochemical tests, a microstructural analysis of the samples was conducted by using optical microscopy and electron scanning microscopy techniques to determine the corrosion mechanism. The results show that the Nyquist plot of the electrochemical impedance data in the NaCl solution consists of high- and low-frequency capacitive impedance loops. When ions are added to the NaCl etchant, the Nyquist plots of the electrochemical impedance data are composed of two different curves: a high-frequency capacitive impedance loop and a low-frequency inductive impedance loop. The corrosion current density increases with increasing concentration, and as a result, the corrosion resistance of the aluminium alloy decreases. The microstructures of 6082 aluminium alloy consist of Mg₂Si secondary particles in a large α-Al matrix. Pitting corrosion initially occurs at the boundary between the matrix and secondary particles because the electrode potentials of the matrix and secondary particles are different. Then, corrosion paths develop along the network-like grain boundaries, and finally, massive network-like corrosion occurs throughout the entire alloy.     

膨胀机主轴缝隙腐蚀的电化学分析

为探究膨胀机主轴的缝隙腐蚀行为,搭建了模拟缝隙腐蚀实验装置。通过电化学测试,确定了不同缝隙位置处的自腐蚀电位随时间的变化规律,并揭示了缝隙内腐蚀反应的发展过程。结果表明:缝隙内腐蚀反应经历双电层形成-氧浓差电池形成-金属水解三个反应过程。在富氧条件下,腐蚀产物的主要成分为Fe(OH)2。随着氧气的耗尽,氧浓差电池形成,腐蚀产物逐渐向FeOOH和Fe3O4转变。     

机加工孔套管抗挤压强度有限元分析

套管屈服强度直接影响套管抗挤压性能，套管在加工孔过程中可能诱发孔眼附近材料发生金属相变，导致套管屈服强度不再均匀分布，进而影响套管抗挤压强度。在相同工况下，对比了P110完整套管和机加工孔套管的抗挤压强度，以此为参照组分析了相变区域面积和相变区域屈服强度对机加工孔套管抗挤压强度的影响。结果表明，机加工孔会改变材料屈服强度，进而影响套管抗挤压性能。随金属相变区域屈服强度减小，机加工孔套管抗挤压强度减弱；当金属相变区域屈服强度增大时，机加工孔套管抗挤压强度增强。且机加工孔套管相变区域面积对机加工孔套管抗挤压强度的影响随相变区域屈服强度增加而逐渐削弱。